A new rule issued today by the U.S. Department of Labor’s Occupational Safety and Health Administration dramatically lowers workplace exposure to beryllium, a strategically important material that can cause devastating lung diseases. The new beryllium standards for general industry, construction and shipyards will require employers to take additional, practical measures to protect an estimated 62,000 workers from these serious risks.
Recent scientific evidence shows that low-level exposures to beryllium can cause serious lung disease. The new rule revises previous beryllium permissible exposure limits, which were based on decades-old studies.
The final rule will reduce the eight-hour permissible exposure limit from the previous level of 2.0 micrograms per cubic meter to 0.2 micrograms per cubic meter. Above that level, employers must take steps to reduce the airborne concentration of beryllium. The rule requires additional protections, including personal protective equipment, medical exams, other medical surveillance and training, as well. It also establishes a short-term exposure limit of 2.0 micrograms per cubic meter over a 15-minute sampling period.
To give employers sufficient time to meet the requirements and put proper protections in place, the rule provides staggered compliance dates. Once the rule is effective, employers have one year to implement most of the standard’s provisions. Employers must provide the required change rooms and showers beginning two years after the effective date. Employers are also required to implement the engineering controls beginning three years after the effective date of the standards.
The final rule is available today at the Federal Register here.
Excerpts taken from the link posted below: